Vi lagrar data om din användning i cookies. Genom fortsatt användning godkänner du detta


power Elartiklar

0 produkter
Sortera efter popularitet
Vi hittade inga produkter som passar din filtrering.

Vi hittade inga produkter som passar din filtrering.

Relaterat hos våra butiker

Power-Over-Ethernet (PoE) HAT for Raspberry Pi 4B/3B+

Power-Over-Ethernet (PoE) HAT for Raspberry Pi 4B/3B+

Power-Over-Ethernet (PoE) HAT for Raspberry Pi 4B/3B+.Key FeaturesEasy to assembleCompatible With: Raspberry Pi 4 Model B / Raspberry Pi 3 Model B+Built-in Cooling FanSupport IEEE 802.3af or 802.3at PoE standardDescription Raspberry Pi 4B/3B+ generally uses USB type-C interface for power supply. Although they both have one ethernet interface for internetwork, it can not realize the power supply function. Now, with this PoE Hat, things will be different. I'm afraid the USB type-C cable will not be available anymore. This PoE Hat for Raspberry Pi supports active PoE which includes IEEE 802.3af and 802.3at PoE standard protocol. As a matter of fact, there is a "handshake" between PSE(Power Source Equipment) and PD(Powered Devices) and the PD will not apply the power supply if the supplied voltage is not matched. It is quite safe for your Raspberry Pi. The Hat is perfectly compatible with Raspberry Pi 4B and available for Raspberry Pi 3B+. The way to assemble the HAT on Raspberry Pi Hat is easy as well, you can view the procedure here. Attention PoE power output must be within the budget of the switch when powering multiple boards!!! STANDARDS COMPLIANT POWER OVER ETHERNET SWITCH REQUIRED!!! The network switch or power sourcing equipment (PSE) must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. "Passive PoE" (DC 24V or 48V) is not standards-compliant and may cause damage to equipment. Do not use this product in an enclosed case without active air circulation!!SpecificationInput: IEEE 802.3af Compliant PoEOutput: 5V +-5% up to 2.5A*Protection Circuitry: Transient Overvoltage, Undervoltage Lockout, Thermal Shutdown, Foldback Current LimitingActive airflow and adequate cooling required for stable continuous operation at high load.Weight: 30gPart List1 x Power-Over-Ethernet(PoE) Hat with 3007 Cooling Fan3 x M2.5*9+6 Copper Stick3 x M2.5 Screws3 x M2.5 Nuts1 x Aluminum Heat Sin...

399 kr
467 krinkl. frakt


Power-con 2-pin male to USB female (USB-C and USB-A)

Power-con 2-pin male to USB female (USB-C and USB-A)

Power-con 2-pin male to USB female (USB-C and USB-A) Hawk Woods I-PWC adaptor allows you to use a 11v-17v battery to power your laptop or mobile phone device. The I-PWC provides a hard-wired power-con (D-Tap) lead which can be connected to an external battery, your device can then be connected with your equipment's power cord. The unit will recognise the voltage of your equipment and regulate the battery voltage to match your device. The USB-A outlet supports Qualcomm Quick charge 3.0 meaning the I-PWC will charge compatible devices up to 95% faster compared to a normal charging device. Hawk-Woods have designed the I-PWC with professionals in mind who use their devices to process graphics and to power external devices such as Terra-Byte hard drives and laptops. Our product allows you to work on the go, out in the field without the worry of running out of charge and having to find mains power. The I-PWC supports all power delivery functions for USB-C devices including the MacBook 12", MacBook Pro 13", 15", it also supports most Lenovo, HP, Dell & google devices, check your equipment's specifications. This product is not compatible with the latest 16" MacBook. The product has two outputs; Firstly the USB-C output at 60W - This will run devices at 5v, 9v, 12v, 15v and 20v @ 3A. Secondly a USB-A output at 18W - This will run devices at 3.6v-6.5v@3A, 6.5v-9v@2A, 9v-12v@1.5A.

1 916 kr
2 062 krinkl. frakt
MediaTeknik Logotyp
Christian Johansson·Kategoriansvarig Elartiklar

Populära sökningar i Elartiklar